Although the curb stone is a kind of natural stone, it is processed and put into use in the later stage. Then, how can we make the curb stone still natural after use? Using the thin plate made of curb stone to lay the garden ground or roof tile can give people a feeling of simplicity and nature. Then if some wall decoration is also decorated indoors, it will give people an effect of returning to nature. Now many antique buildings use curb stone, but the surface of curb stone can not be polished and can not bear heavy things, so we should be careful to maintain it.
1. Personnel organization. In order to ensure the Centennial plan of stone archway, we should first organize a construction team with rich construction experience and serious and responsible work. These include experienced material selection personnel, patient and meticulous setting out personnel, skilled carving personnel and bold and safe installation personnel. The personnel of each department shall do their own work in an orderly manner according to the design requirements.
2. Select stone. The choice of stone should be one "quantity", two "look", three "listen" and four "pestle". First, "measurement": when selecting stones, first measure the selected stones, and set out with a curved ruler. Second, "look": carefully check the broken surface of the stones, and select the stones with the same color in the same mountain field, otherwise there will be a large color difference. Third, "listen": hit the stones with a hand hammer. If the sound Bang is crisp, it indicates that the overall performance of the stones is good. Four "pestles": use a drill rod to pestle the protruding part of the stone to further check the solid density of the stone.
3. Setting out and sample preparation. Finished components shall be classified, numbered and stored by category.
4. Make components.
5. Component packaging. Place the component flat on the supporting plate, wrap it with plastic film, and then fasten it with thick iron wire. The quantity of "striking" depends on the length of the component. At the same time, pad a waste tire at the contact between the "striking" iron wire and the component to prevent damaging the component. Large carved components shall be wrapped with plastic film and packed in wooden crates. They shall be firmly fixed, flat and compacted during packaging.
With people's pursuit of health and environmental protection, the green environmental protection of roadside stone products without pollution, radiation and reflection, water absorption, heat absorption, heat preservation, heat insulation, sliding, moisture-proof, cold resistance and antifreeze have become very ideal building materials for building facade, plane and ground. They are widely used in road protection construction, especially their thick texture, no weathering, no discoloration and lasting for a century, The characteristics of yujiumi new highlight its strong cultural taste. It is a kind of high-quality granite.
Mobile website